TRIPP-LITE TrippLite PowerVerter® APS INT Series 3600W Inverter/Charger with Auto-Transfer Switching and Line Interactive Voltage R

POWERVERTER® Series APSINT3636VR PowerVerter® APS INT Series 3600W Inverter/Charger... Viac...
Dostupnosť: Na ceste
Product ID: APSINT3636VR
1 203,70 € s DPH

Popis produktu

PowerVerter® APS INT Series 3600W Inverter/Charger with Auto-Transfer Switching and Line Interactive Voltage Regulation

Do you need a cost-effective alternative AC power source for off-grid or alternative energy applications? This PowerVerter® DC-to-AC Inverter/Charger provides up to 3600W of continuous output from a 36V DC or 230V AC input, and its Auto-Transfer Switching (ATS) feature supports near instantaneous transfer to battery power during blackouts and severe voltage fluctuations, making it ideal for battery backup applications in areas where utility power is unreliable. Plus, its integrated 3-stage battery charger offers fast recharge rates while preserving battery life.
36V DC or 230V AC input, 230V, 50 Hz output (hardwired)
3600 watts continuous, 5400 watts OverPower and 7200 watts DoubleBoost inverter output (see specifications)
3 stage, 30 amp selectable wet/dry cell battery charger
Auto Transfer Switching option for battery backup / UPS operation - includes wired APSRM4 remote control switch
Automatic Voltage Regulation corrects brownouts and overvoltages without using battery powerhicle chassis ground
Intended Application Emergency Home Power
Frequency compatibility 50 Hz
Output watts 3600
Continuous output capacity (watts) 3600
Peak output capacity (watts) 7200
Output nominal voltage 230V
Output voltage regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output frequency regulation 50 Hz (+/- 0.3 Hz)
Overload protection Includes 12A input breaker dedicated to the charging system and 20A output breaker for AC output loads.
Outlet quantity / type Hardwire
Nominal Input Voltage(s) Supported 230V AC
Recommended Electrical Service DC INPUT: Requires 36VDC input source capable of delivering 114A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 300A minimum battery system fusing is recommended.
Maximum input amps / watts DC INPUT: Full continuous load - 114A at 36VDC. AC INPUT: 26 amps at 230VAC with full inverter and charger load (10.4A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection type DC INPUT: Set of DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage compatibility (VAC) 230
Voltage compatibility (VDC) 36
Expandable battery runtime Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage (VDC) 36
Battery Pack Accessory (optional) 98-121 sealed lead acid battery (optional)
Battery charge 30 amp
Voltage regulation description Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels
Overvoltage correction Over-voltages are automatically reduced by 10%
Brownout correction Brownouts are automatically boosted by 10%
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Shipping Dimensions (HWD/in) 13.25 x 15 x 21.13
Shipping Dimensions (HWD/cm) 33.66 x 38.1 x 53.67
Shipping weight (lbs) 63
Shipping weight (kg) 28.6
Unit Dimensions (HWD/in) 7 x 8.5 x 14
Unit Dimensions (HWD/cm) 17.78 x 21.59 x 35.56
Unit weight (lbs) 58
Unit weight (kg) 26.3
Cooling method Multi-speed fan
Material of construction Polycarbonate
Style Heavy-duty with built-in battery charger
Form factors supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Relative Humidity 0-95% non-condensing
Transfer time from line power to battery mode 20 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
Low voltage transfer to battery power In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182V - see manual)
High voltage transfer to battery power In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 - see manual)
Appearance Black color
Load Sensing Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
Remote control capability Yes

Opýtajte sa nášho predajcu