TRIPP-LITE TrippLite POWERVERTER® Series 230V, 2000W PowerVerter APS INT Inverter/Charger with Pure Sine Wave Output

POWERVERTER® Series APSX2012SW 230V, 2000W PowerVerter APS INT Inverter/Charger with Pure... Viac...
Dostupnosť: Na ceste
Product ID: APSX2012SW
1 332,00 € s DPH

Popis produktu


POWERVERTER® Series
APSX2012SW
230V, 2000W PowerVerter APS INT Inverter/Charger with Pure Sine Wave Output

Looking to reproduce wall power from a battery source without any power interference? Are you using a vehicle battery or separate battery bank to supply power in remote locations or work environments where wall power / shore power is not available? With reliable 230V AC power, Pure Sine Wave output and the ability to charge batteries, the Tripp Lite APSX2012SW is your answer.
12V DC or 230V AC input, 230V, 50 Hz output (hardwired)
2000 watts continuous output, 4000 watts peak output
Selectable 6/60 amp wet/dry cell battery charger
Pure sine wave output
Quiet, high efficiency operation, high surge capacity and low idle current
Seamless transfer switching

SpecificationsOVERVIEW
Intended Application Emergency Home Power, Auxillary Vehicle power, UPS backup
OUTPUT
Frequency compatibility 50 Hz
Output watts 2000
Continuous output capacity (watts) 2000
Peak output capacity (watts) 4000
Output nominal voltage 230V
Output voltage regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 230 VAC (+/-5%).
Output frequency regulation 50 Hz (+/- 0.3 Hz)
Overload protection Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Outlet quantity / type Hardwire
INPUT
Nominal Input Voltage(s) Supported 230V AC
Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
Maximum input amps / watts DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage compatibility (VAC) 230
Voltage compatibility (VDC) 12
BATTERY
Expandable battery runtime Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage (VDC) 12
Battery Pack Accessory (optional) 98-121 sealed lead acid battery (optional)
Battery charge Selectable 8/80 amp
VOLTAGE REGULATION
Brownout correction Brownout transfer point - 170V (+/- 3%)
Severe brownout correction Brownout reset point - 180V (+/- 3%)
LEDS ALARMS & SWITCHES
Alarms Audible Status indicators (see manual)
Switches The inverter provides an RJ-45 port for optional APSRMSW retmote control. RJ-45 port operates with standard RS-485 interface (APSRMSW sold separately)
Front panel LEDs Display inverter status, charger status as well as bettery voltage status
PHYSICAL
Shipping weight (lbs) 46
Shipping weight (kg) 20.9
Unit Dimensions (HWD/in) 7.25 x 8.75 x 21.75
Unit Dimensions (HWD/cm) 18.41 x 22.22 x 55.24
Unit weight (lbs) 51.16
Unit weight (kg) 23.21
Cooling method Multi-speed fan
Material of construction Powder coated steel
Receptacle Color Gray
Style Heavy-duty with built-in battery charger
Form factors supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from line power to battery mode 10 milliseconds
Low voltage transfer to battery power In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual)
High voltage transfer to battery power In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 - see manual)
SPECIAL FEATURES
Appearance gray color
Load Sensing 150W ~ 220W
Remote control capability Yes

Opýtajte sa nášho predajcu