TRIPP-LITE TrippLite POWERVERTER® Series 1250W APS X Series Inverter/Charger with Auto-Transfer Switching and 2 C13 Outlets

POWERVERTER® Series APSX1250 PowerVerter® APS X Series 1250W Inverter/Charger with... Viac...
Dostupnosť: Na objednanie
Product ID: APSX1250
Predaj na splátky: Vypočítajte si splátky
476,60 € s DPH

CETELEM - nákup na splátky - navýšenie 0%

Popis produktu

PowerVerter® APS X Series 1250W Inverter/Charger with Auto-Transfer Switching and 2 C13 Outlets
12V DC or 230V AC input, 230V, 50 Hz output, 2 AC outlets
1250 watts continuous, 1875 watts OverPower and 2500 watts DoubleBoost inverter output (see specifications)
3 stage, selectable 7.5 / 30 amp wet/dry cell battery charger with 1/2 cycle transfer time
Auto Transfer Switching option for battery backup / UPS operation
Reliability enhanced large-transformer design with protected DC terminals

Intended Application Emergency Home Power
Frequency compatibility 50 Hz
Output watts 1250
Continuous output capacity (watts) 1250
Peak output capacity (watts) 2500
Output nominal voltage 230V
Output voltage regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output frequency regulation 50 Hz (+/- 0.3 Hz)
Overload protection Includes 5A input breaker dedicated to the charging system and 6A output breaker for AC output loads
Outlet quantity / type 2 Universal (IEC-320)
Nominal Input Voltage(s) Supported 230V AC
Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC INPUT: 230VAC
Maximum input amps / watts DC INPUT: Full continuous load - 125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection
Voltage compatibility (VAC) 230
Voltage compatibility (VDC) 12
Expandable battery runtime Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage (VDC) 12
Battery Pack Accessory (optional) 98-121 sealed lead acid battery (optional)
Battery charge Selectable 7.5 / 30 amp with 1/2 cycle transfer time
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
AC suppression joule rating 840
Shipping Dimensions (HWD/in) 12.5 x 11 x 10.75
Shipping Dimensions (HWD/cm) 31.75 x 27.94 x 27.31
Shipping weight (lbs) 26
Shipping weight (kg) 11.8
Unit Dimensions (HWD/in) 7 x 8.75 x 9
Unit Dimensions (HWD/cm) 17.78 x 22.23 x 22.86
Unit weight (lbs) 24
Unit weight (kg) 10.9
Cooling method Multi-speed fan
Material of construction Polycarbonate
Style Heavy-duty with built-in battery charger
Form factors supported Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional mounting information)
Relative Humidity 0-95% non-condensing

Opýtajte sa nášho predajcu