Supermicro Server SYS-5018D-MTRF 1U SP

Key Features 1. Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3, 4th gen. Core... Viac...
Dostupnosť: Na ceste
Product ID: SYS-5018D-MTRF
1 099,10 € s DPH

Popis produktu

Key Features

1. Single socket H3 (LGA 1150) supports
Intel® Xeon® E3-1200 v3, 4th gen.
Core i3, Pentium, Celeron processors
2. Intel® C224 Express PCH
3. 4x 3.5" Hot-swap SATA3 HDD bays
4. 1x PCI-E 3.0 x8 (in x16) Full-height slot
5. Up to 32GB DDR3 ECC 1600MHz
UDIMMs in 4 sockets
6. Dual Gigabit Ethernet LAN ports
(1x Intel® i217LM & 1x Intel® i210AT)
7. IPMI 2.0 on Dedicated LAN port
8. 400W Redundant Power Supplies
Optional Battery Backup Power (BBP®)

Product SKUs

SYS-5018D-MTRF SuperServer 5018D-MTRF (Black)


Super X10SLM-F


CPU Intel® Xeon® processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
Socket H3 (LGA 1150)

System Memory

Memory Capacity 4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C224 Express PCH
SATA SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
SATA2 (3Gbps) w/ RAID 0, 1
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 BMC with 10/100/1000Mbps
Network Controllers Intel® i217LM + Intel® i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA Aspeed AST2400 BMC

Input / Output

Serial ATA 4x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports
SATA DOM Power Connector
LAN 2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 4x USB 3.0 ports (1 Type-A, 2+1 via header)
6x USB 2.0 ports (4 rear, 2 via header)
VGA 1x VGA port
Serial Port / Header 1x Fast UART 16550 serial port
1x internal header

PC Health Monitoring

Voltage Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of five 4-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
LED CPU / System Overheat LED
+5V Standby alert LED
Other Features Chassis intrusion detection
Chassis intrusion header


Form Factor 1U Rackmount
Model CSE-813MTQ-R400CB


Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 19.8" (503mm)
Weight Gross Weight: 31.4 lbs (14.3 kg)
Net Weight: 18.6 lbs (8.5 kg)
Available Colors Black

Front Panel

Buttons Power On/Off button
System Reset button
LEDs Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Ports 2x USB ports
1x Serial COM Port

Expansion Slots

PCI-Express 1x PCI-E 3.0 x8 (in x16) Full-height slot

Drive Bays

Hot-swap 4x 3.5" Hot-swap SATA3 HDDs w/ RAID
Peripheral Bay Slim optical drive (optional)


SAS2/SATA3 HDD Backplane
(SAS support requires optional SAS controller)

System Cooling

Fans 4x 4cm 12,500 RPM PWM fans
Optional fans to cool add-on cards

Power Supply
400W (1+1) Redundant SuperCompact Short-depth AC-DC Gold-level power supply with PMBus and I2C
AC Input 400W: 100-240 V, 50-60 Hz, 6-3 Amp
DC Output
+5V standby 3 Amp
DC Output
+12V 33 Amp
With Power Distributor +5V: 25 Amp
+3.3V: 25 Amp
-12V: 0.6 Amp

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0
USB Keyboard support


Software IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor® III
Watch Dog
Power Configurations ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on

Operating Environment / Compliance

RoHS RoHS2 (2011/65/EU) Compliant
Environmental Spec. Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

Opýtajte sa nášho predajcu