Supermicro Motherboard Xeon X9DRW-7TPF+ Dual socket R (LGA 2011) Intel®dual 10G SFP+ ,i350 Dual port GbE LAN

Key Features 1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600... Viac...
Dostupnosť: Na ceste
Product ID: X9DRW-7TPF+
1 113,50 € s DPH

Popis produktu


Key Features

1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
2. Intel® C602J chipset, QPI up to 8.0GT/s
3. Up to 1.5TB ECC DDR3, up to 1866MHz,
24x DIMM sockets
* Depends on memory configuration
4. Riser card support:
Left side - 1 (x32) PCI-E 3.0
Right side - 1 (x16) PCI-E 3.0
5. Intel® 82599 Dual port 10G SFP+ &
Intel® i350 Dual port GbE controllers
6. 4x SATA2 and 2x SATA3 ports
7. 8x SAS2 ports via LSI 2208 HW RAID
8. Integrated IPMI 2.0 and KVM with
Dedicated LAN
9. 7x USB 2.0 ports
(2 rear, 4 via header + 1 Type A)

Product SKUs

MBD-X9DRW-7TPF+ -B X9DRW-7TPF+ (Bulk Pack)

Physical Stats

Form Factor Proprietary WIO
Dimensions 12.8" x 16.5" (32.5cm x 41.9cm)

Processor/Cache

CPU Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache Up to 20MB
System Bus QPI up to 8 GT/s

System Memory

Memory Capacity 24x 240-pin DDR3 DIMM sockets
Up to 1.5TB DDR3 ECC LRDIMM
Up to 768GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V, 1.35 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C602J chipset
SATA SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS SAS2 from LSI 2208 (1GB cache)
HW RAID 0, 1, 5, 6, 10, 50, 60 support
Supports up to 16 devices
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers Intel® 82599 Dual Port 10G SFP+
Intel® i350 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10G SFP+, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video G200 (Nuvoton WPCM450 BMC w/ graphic controller)

Input / Output

SATA 2 SATA 3.0 ports (6Gb/s)
4 SATA 2.0 ports (3Gb/s)
SAS 8 SAS2 ports (6Gb/s)
LAN 2 SFP+ 10GbE LAN ports
2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB 7 USB 2.0 ports total
(2 rear + 4 via header + 1 Type A)
Video 1 VGA port
Keyboard/Mouse 1 Combo Keyboard/Mouse PS/2 port
Serial Port / Header 1 Fast UART 16550 port / 1 Header
TPM 1 TPM 1.2 20-pin Header

Chassis ( Optimized for X9DRW-7TPF+ )

1U Chassis CSE-119TQ-R700WB
CSE-819TQ-R700WB
2U Chassis CSE-219A-R920WB
CSE-829BTQ-R920WB
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
Please order the optional I/O shield (2 LAN + 2TG) separately if the order is not bulk.

Expansion Slots

PCI-Express Left hand riser: 1 PCI-E 3.0 (x32)
Right hand riser: 1 PCI-E 3.0 (x16)

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

Management

Software SuperDoctor® III
Watch Dog
NMI
Optional IPMI 1.5 / 2.0
Power Configurations ACPI / APM Power Management
Power-on mode for AC power recovery

PC Health Monitoring

Voltage Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
FAN 6x 4-pin fan headers (up to 6 fans)
6x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 6x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID
Other Features Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS


Operating Environment

Operating Temperature Range 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range 5% - 95% (non-condensing)







Parts List (Bulk)

Opýtajte sa nášho predajcu