Supermicro Motherboard Xeon X9DRH-iTF Dual socket R (LGA 2011) Intel® x540 Dual port 10 GbE LAN

Key Features 1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600... Viac...
Dostupnosť: Na ceste
Product ID: X9DRH-iTF
Predaj na splátky: Vypočítajte si splátky
804,30 € s DPH

CETELEM - nákup na splátky - navýšenie 0%

Popis produktu


Key Features

1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
2. Intel® C602 chipset, QPI up to 8.0GT/s
3. Up to 1TB ECC DDR3, up to 1866MHz,
16x DIMM sockets
4. Expansion slots:
1 PCI-E 3.0 x16 and 6 PCI-E 3.0 x8
5. Intel® X540 Dual port 10GBase-T
6. 8x SATA2 and 2x SATA3 ports
7. Integrated IPMI 2.0 and KVM with
Dedicated LAN
8. 7x USB 2.0 ports
(4 rear, 2 via header + 1 Type A

Product SKUs

MBD-X9DRH-iTF -O X9DRH-iTF (Standard Retail Pack)
MBD-X9DRH-iTF -B X9DRH-iTF (Bulk Pack)

Physical Stats

Form Factor Extended ATX
Dimensions 12.1" x 13" (30.7cm x 33.2cm)

Processor/Cache

CPU Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP **)
Note † BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
Cache Up to 30MB
System Bus QPI up to 8 GT/s

System Memory

Memory Capacity 16x 240-pin DDR3 DIMM sockets
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM
Memory Type 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Support ECC and non-ECC UDIMMs
DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM
Memory Voltage 1.5 V, 1.35 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices

Chipset Intel® C602 chipset
AHCI SATA SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SCU SATA SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers Intel® X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video Matrox G200eW

Input / Output

AHCI SATA 2 SATA 3.0 ports (6Gb/s)
4 SATA 2.0 ports (3Gb/s)
SCU SATA 4 SATA 2.0 ports (3Gb/s)
LAN 2 RJ45 10GbE LAN ports
1 RJ45 Dedicated IPMI LAN port
USB 7 USB 2.0 ports total
(4 rear + 2 via header + 1 Type A)
Video 1 VGA port
Serial Port / Header 2 Fast UART 16550 serial COM port
(1 rear & 1 header)
DOM 1 DOM (Disk on Module) power connector
TPM 1 TPM 1.2 20-pin Header

Chassis (Optimized for X9DRH-iTF )

2U Chassis CSE-825TQ-R740LPB
CSE-826BA-R1K28LPB
CSE-826BA-R920LPB
CSE-826BE16-R1K28LPB
CSE-826BE16-R920LPB
CSE-826BE26-R1K28LPB
CSE-826BE26-R920LPB
3U Chassis CSE-835TQ-R920B
CSE-836BA-R1K28B
CSE-836BE16-R1K28B
CSE-836BE26-R1K28B
Tower / 4U Rackmount CSE-846BA-R1K28B
CSE-846BE16-R1K28B
CSE-846BE26-R1K28B
CSE-847A-R1400B
CSE-847A-R1K28LPB
CSE-847E16-R1400B
CSE-847E16-R1K28LPB
CSE-847E26-R1400B
CSE-847E26-R1K28LPB
Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.



Expansion Slots

PCI-Express 1x PCI-E 3.0 x16 slot
6x PCI-E 3.0 x8

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)

System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

Management

Software SuperDoctor® III
Watch Dog
NMI
IPMI 1.5 / 2.0
Power Configurations ACPI / APM Power Management
Power-on mode for AC power recovery

PC Health Monitoring

Voltage Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
5+1 Phase-switching voltage regulator
FAN 8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
Other Features Chassis intrusion detection
Chassis intrusion header
RoHS, Halogen Free
Dual Cooling Zones


Operating Environment

Operating Temperature Range 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range 5% - 95% (non-condensing)

Opýtajte sa nášho predajcu