Supermicro MB Xeon E5-2600V3 2xLGA2011-3, iC612 16x DDR4 ECC _x0001_, _x0002_0xSATA3/8xSAS3 LSI 3108 2GB(PCI-E 3.0/1,6(x16,x8), 2x 10G

Popis produktu: 1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3... Viac...
Dostupnosť: Na ceste
Product ID: MBD-X10DRH-C-O
Predaj na splátky: Vypočítajte si splátky
948,10 € s DPH

CETELEM - nákup na splátky - navýšenie 0%

Popis produktu


Popis produktu:

1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600 v3
family, QPI up to 9.6GT/s
2. Intel® C612 chipset
3. Up to 1TB ECC DDR4 2133MHz,
16x DIMM slots
4. 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8 slots
5. Intel® X540 Dual port 10GBase-T
6. 10x SATA3 (6Gbps) ports w/ Intel
C612 controller, RAID 0, 1, 5, 10
7. 8x SAS3 (12Gbps) ports w/ LSI 3108
controller (2GB cache), RAID 0, 1, 5,
6, 10, 50, 60
8. Integrated IPMI 2.0 and KVM with
Dedicated LAN
9. 5x USB 3.0 and 4x USB 2.0 ports

Physical Stats

Form Factor E-ATX

Dimensions 12" x 13" (30.5cm x 33.2cm)


Processor/Cache

CPU Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
Dual Socket R3 (LGA 2011)

Cores / Cache Up to 18 Cores / Up to 45MB Cache

System Bus QPI up to 9.6 GT/s

Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.

System Memory

Memory Capacity 16x 288-pin DDR4 DIMM slots
Up to 1TB ECC LRDIMM, 512GB ECC RDIMM

Memory Type 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB

Memory Voltage 1.2 V

Error Detection Corrects single-bit errors


On-Board Devices

Chipset Intel® C612 Express chipset

SAS LSI 3108 SAS3 (12Gbps) controller,
2GB cache, HW RAID 0, 1, 5, 6, 10, 50, 60
Supports up to 16 devices as default, more HDD devices support is also available as an option *

For special SKU, please contact your Supermicro Sales.

AHCI SATA SATA3 (6Gbps), RAID 0, 1, 5, 10

SCU SATA SATA3 (6Gbps), RAID 0, 1, 5, 10

IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC

Network Controllers Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8211E PHY (dedicated IPMI)

Video ASPEED AST2400 BMC


Input / Output

SAS 8x SAS3 (12Gbps) ports

SATA 10x SATA3 (6Gbps) ports

LAN 2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port

USB 5x USB 3.0 ports (2 rear + 2 via header + 1 Type A)
4x USB 2.0 ports (2 rear + 2 via header)

Video 1x VGA Connector

Serial Port / Header 2x Fast UART 16550 serial
2x COM Ports (1 rear, 1 header)

DOM 2x SuperDOM (Disk on Module) ports

TPM 1x TPM 1.2 20-pin Header


Chassis (Optimized for X10DRH-CT )

2U Chassis: SC826BE1C-R920LPB

3U Chassis: SC835TQ-R920B
SC836BE1C-R1K03B
SC836BE2C-R1K03B

Mid/Mini Tower Chassis: SC732D4F-903B
SC732i-865B

4U / Tower Chassis: SC743TQ-1200B

Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.



SuperServer(s) with X10DRH-CT

Model(s) SYS-2028R-C1RT
SYS-7048R-C1RT



Expansion Slots

PCI-Express 1x PCI-E 3.0 x16
6x PCI-E 3.0 x8


System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features Plug and Play (PnP)
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1


Management

Software Intel® Node Manager 3.0
IPMI 2.0
SPM
SUM
SuperDoctor® 5
NMI
Watch Dog

Power Configurations ACPI / APM Power Management
Power-on mode for AC power recovery


PC Health Monitoring

Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
6 Phase-switching voltage regulator

FAN 8x 4-pin fan headers (up to 8 fans)
8x fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors

Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
Thermal Monitor 2 (TM2) support
PECI

LED CPU / System Overheat LED
Suspend static indicator LED
UID/Remote UID

Other Features Chassis intrusion detection
Chassis intrusion header
SDDC Support
RoHS



Operating Environment

Operating Temperature Range 10°C - 35°C (50°F - 95°F)

Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F)

Operating Relative Humidity Range 8% - 90% (non-condensing)

Non-Operating Relative Humidity Range


Opýtajte sa nášho predajcu