Supermicro MB Opteron41xx H8DCL-IF AMD SP5100 IG 2xGLAN RAID

Key Features 1. Dual AMD Opteron™ 4100 Series processors (Socket C32) 6/4-Core ready, HT3.0... Viac...
Dostupnosť: Na ceste
Product ID: H8DCLIF
Predaj na splátky: Vypočítajte si splátky
459,20 € s DPH

CETELEM - nákup na splátky - navýšenie 0%

Popis produktu


Key Features

1. Dual AMD Opteron™ 4100 Series
processors (Socket C32) 6/4-Core
ready, HT3.0 Link support
2. AMD SR5690 + SP5100 Chipset
3. Up to 128GB of DDR3 Registered ECC
1333/1066/800 or 32GB of DDR3
Unbuffered ECC/non-ECC SDRAM in
8 DIMMs
4. Dual Intel® 82574 Gigabit Ethernet
Controller
5. 6x SATA (3.0 Gb/s) ports via
AMD SP5100 controller, RAID 0, 1, 10
6. 1/3/1/1 PCI-E 2.0 x8 in x16/x8/x4
in x8/PCI expansion slot
7. Integrated Matrox G200eW Graphics
8. Integrated IPMI 2.0 with Dedicated
LAN





Links & Resources




Tested Memory List

Tested HDD List

Motherboard Manual

Update Your BIOS

IPMI Firmware

Download the Latest Drivers and Utilities










Product SKUs

MBD-H8DCL-iF H8DCL-iF (Standard Retail Pack)

Physical Stats

Form Factor ATX
Dimensions 12" x 10"

Processor/Chipset

CPU Dual 1207-pin Socket C32
Supports two Six/Four-Core ready AMD Opteron™ 4100 Series processors
HT3.0 Link support
Chipset AMD chipset SR5690 + SP5100

System Memory

Memory Capacity 8 DIMM sockets
Support up to 128GB of DDR3 Reg. ECC 1333/1066/800 or 32GB of DDR3
Unb. ECC/non-ECC
Dual channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
See Detailed Memory Support Matrix
Memory Type Registered ECC or unb. ECC / non-ECC DDR3 1333/1066/800 MHz SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.35V or 1.5V

On-Board Devices

SATA AMD SP5100 (RAID 0, 1, 10)
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM over LAN support
Winbond® WPCM450 BMC
Network Controllers 2 Intel® 82574L single-port Gigabit Ethernet Controllers
10/100/1000BASE-T support
VGA Matrox G200eW 16MB DDR2
Super I/O Winbond® W83527 chip

Input / Output

SATA 6x SATA (3Gb/s) ports
LAN 2 RJ45 LAN ports
1 RJ45 Dedicated LAN supports IPMI
USB 7x USB 2.0 ports
2 rear, 1 Type-A, 2 headers for 4 ports
VGA 1x VGA port
Serial Ports 2x Fast UART 16550 serial port (one header & one port)
Power SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V

Note: Two 8-pin connectors are required to support 2 CPUs due to SSI spec

Expansion Slots

PCI-E 1/3/1/1 PCI-E 2.0 x8 in x16/x8/x4 in x8/PCI

Chassis (Optimized for H8DCL-iF )

3U/Mid Tower CSE-835TQ-R920B
CSE-936A-R900B
CSE-936A-R1200B
CSE-732i-500B
Tower/4U Rackmount CSE-743TQ-865B
CSE-743TQ-865B-SQ
CSE-743TQ-R760
CSE-745TQ-800B
CSE-745TQ-920B
CSE-745TQ-R800B
CSE-842TQ-665B
CSE-846A-R1200B
CSE-846E1-R900B
CSE-846E16-R1200B
CSE-846E2-R900
CSE-846E26-R1200B
Recommendation:
1. Strongly suggest using SuperMicro recommended chassis
2. Active Heatsink SNK-P0024AP4 is recommend used on tower and 4U chassis

System BIOS

BIOS Type 16Mb SPI Flash ROM with AMI® BIOS
BIOS Features Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 2.0
USB Keyboard Support
SMBIOS 2.3

Management

Software IPMI (Intelligent Platform Management Interface) 2.0
Super Doctor III
Power Configurations ACPI Power Management
Wake-On-LAN (WOL) header
Keyboard Wakeup from Soft-Off
Power-on mode control for AC power loss recovery

PC Health Monitoring

CPU Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
CPU switching voltage regulator
FAN Up to 6-fan status tachometer monitoring
Up to 6x 4-pin fan headers
Status monitor for speed control
4-pin fan support (w/o speed control)
Low noise fan speed control
(4-pin fan only)
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED CPU / System Overheat LED
+5V Standby Alert LED
Other Features Chassis Intrusion Detection
Chassis Intrusion Header

Operating Environment / Compliance

RoHS

RoHS Compliant 5/6, Pb Free
Environmental Specifications Operating Temperature:
10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)

OS Compatibility

• Please see our OS Compatibility Chart

Regulatory

FCC Passed to meet FCC standard requirement







Retail Pack List

Part Number Qty Description
H8DCL-iF MBD-H8DCL-iF -O 1 H8DCL-iF Motherboard
Retention BKT-0012L 2 RETENTION MODULE FOR AMD CPU SOCKET F,ROHS
I/O Cable 1 CBL-0044L 6 57.5CM SATA FLAT S-S PBF
I/O Cable 2 CBL-0083L 1 15.7" USB 2.0 2-PORT W/KEY
I/O Cable 3 CBL-010L 1 9 PIN SERIAL PORT DTK CABLE, LF
I/O Cable 4 CBL-036L-03 1 18" ATA 133/100/66 3-DROP TPE CABLE, PBF
Driver Disk CDR-APLUS2 1 DRIVER CD FOR AMD SP5100 CHIPSET MB
I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)

Opýtajte sa nášho predajcu